Why am I Constantly Breaking Vacuum Cleaner Belts?

Imagine this you are vacuuming your dining room floor, preparing for company to come over for a special dinner when suddenly. You hear a noise that sounds like something that just broke. It was the vacuum belt, but you can prevent this situation from happening by following a few simple tips. Regardless of the type of vacuum you have, upright or canister, it is almost certain to have a belt within it. Simply made of a band of rubber, belts are made of many unique sizes and styles to accommodate the numerous vacuum cleaners found in houses today.

One of the first things to look for when trying to fix a problem with a belt is to make sure that the belt is meant to work with your vacuum cleaner. Although belts are similar in construction, each vacuum cleaner belt is created in a way to work smoothly with a certain vacuum cleaner. Incorrect usage of a wrongly fitting belt will lead either to a broken belt, or even a broken vacuum.

Some machines say the belt number or style on the actual machine, but if it does not the actual belt itself should have the number printed right on it. Referring to your instruction manual may also help you find the proper belt number for your machine.

Proper installation of your belt is essential for a properly functioning machine and preventing belt breakage. Remember when installing your vacuum belt that the belt goes over the motor spindle and over the brush roll. A large amount of tension will be felt when installing a belt. This tension is typical and required and without this tension the brush roll would not rotate properly.

But why do vacuum belts break? Should I be worried if I am constantly breaking belts? Even if a belt is installed correctly a belt can still break regardless. Some belts can break just from constant machine use, but the most common cause of belt breakage is snagging. When a machine runs over the edge of a rug or a blanket, the belt gets jammed, overheated and instantly breaks. Belt breakage caused by snagging can happen over and over again and will only stop when you buy a new vacuum with a gear-driven belt system with electronic overload.

To prevent belt breakage it is remember to keep a few things in mind while vacuuming. First check to see if you have correctly installed the belt into the machine, and secondly check to see that the type of belt is appropriate to you machine. After an initial check of the whether or not you have the proper belt you can begin vacuuming. While vacuuming it is important to remember not to run over anything that cause snagging. Snagging an item such as a towel, a blanket, the edge of a carpet, or even the vacuum cleaners power cord, will put you at great risk of instantly incinerating your vacuum cleaner belt. Another tip to remember is to regularly change your vacuum cleaner belt every 6 months. Over time a belt becomes more elastic, and loose around the brush roll, consequently the brush roll will no longer turn at the appropriate revolutions per minute. The vacuum cleaner belt being loose causes a to vacuum not to function at an optimal level and can be avoided if the belt is changed every 6 months.

When looking for a particular belt for you vacuum cleaner the amount of choices may be overwhelming. There is a tremendous amount of belts available ranging from flat belts, round belts and cogged belts. Round belts are mostly found on older vacuum cleaners that have a fan system. Cogged belts are found on vacuums that have a feature called 'electronic overload.' 'Electronic overload' is when a machine shuts down entirely when there is a snag, and the user has the ability to simply turn the machine on and off or reset the machine in order to start vacuuming again with a non-broken belt. Cogged belts are the best, as they break the least often due to their rsistance to snagging, and are found on vacuum cleaners such as Miele, Simplicity, Dyson, and Sebo. Another great feature of a cogged belt system is that because of its design you do not have to buy a belt every 6 months. A tremendous saver of annoyance this feature should be seriously considered when going out to buy your subsequent vacuum cleaner.

Buying a vacuum cleaner that is built to strongly resist belt breakage and following the easy steps above, will prevent you from being one of the many people with vacuum cleaner belt breakage problems. The reasons and causes for belt breakage are easily avoidable and following these simple tips may help prevent the amount a belt breakage that occurs on your vacuum cleaner.

Criminal Records | Criminal Record | Public Record Finder | People Search | Background Checks | Background Check Gateway | | Public Record | Lookup Anyone | People Lookup

To buy a vacuum cleaner that Doesn't need belt changes and has the electronic overload protection stated in this article visit our assortment of Miele vacuum cleaners.

5 out of 54 out of 53 out of 52 out of 51 out of 5  

Not yet Rated | Article Directory
Why am I Constantly Breaking Vacuum Cleaner Belts?

Please Rate this Article